In the use of sand blasting machine, if there is uneven sand density, it is necessary to understand the causes of this situation in detail, so as to reasonably solve the problem, ensure the use of equ
1. Do I need to punch holes when using waterjet cutting tools? The water jet does not need to be punched in advance during cutting, and the water jet will directly cut the tool according to the figur
Due to the impact and cutting effect of abrasive on the workpiece surface, the workpiece surface can obtain certain cleanliness and different roughness, thus improving the mechanical properties of the
The best way to clean the casting is to mix the steel shot with steel grit, the steel grit which can be thrown to the corner, and the steel shot can be thrown to the flat surface, but also to avoid th
In order to meet the different needs of domestic and foreign customers, on the basis of independent production and processing of high quality garnet sand, at the same time we introduce the high qu
Reflective glass beads for road markings can improve the reflective performance of road marking paint. The car lamp lights on the marking lines with glass beads, which can reflect the light of the car
When the hardness of the steel shot is greater, when cleaning the workpiece, its speed is very fast, but the consumption of the steel shot will also become very fast so that its service life will be s
1. Before use Connect to the air source and power supply of the sandblasting machine, and open the power switch on the electrical box. According to the need to adjust the pressure of compressed ai
White spots refer to the white impurities appearing in the grain size of brown corundum, which are formed during the smelting process of brown corundum. Raw materials such as iron filings and anthraci
Garnet sand can be used for sandblasting, grinding steel and other materials, used for ship building and large equipment manufacturing metal surface treatment; Garnet supply is stable, the material
Glass bead can be used int the following fileds: 1. The surface matt treatment of stainless steel products 2. Used for cleaning various molds 3. Remove the tensile stress of various mechanica
Garnet have strong chemical inert, high melting point, good toughness, insoluble in water, acid solubility is only 1%, basically does not contain free silicon, it also with high physical impact resist
Garnet sand abrasive as cutting medium, relying on high pressure water jet cutting workpiece, more commonly used in oil and gas pipelines, steel and other parts of the cutting, is a new safe and en
Sandblasting machine in the use process, in order to ensure the correct use of the stable use of efficiency, it is very important to understand the work of the equipment in detail and where, so, in or
2005-2019 © All Rights Reserved.JINAN JUNDA INDUSTRIAL TECHNOLOFY CO.,LTD