Pay attention during the Water jet cutting machine processing

1.The operator and unrelated personnel should keep a certain distance from the equipment during the process of cutting the workpiece.
2.When cutting smaller, lighter workpiece, should take fixed measures to prevent the  workpiece out of position during the process of cutting
3.The workpiece to be cut is placed smoothly to avoid the damage of garnet sand cutting pipe and the occurrence of safety accidents.  
4.If found that the workpiece is knocked out of position during the cutting, do not use other objects to correct.
5.In the process of taking material and changing the nozzle, we must first turn off the high pressure water switch or high pressure, and operate after removing the residual high pressure water. 
6.Different pressure should be selected according to different materials for operation.
7.Pay attention to the working seal of the supercharger and high pressure pipe of the water jet
8.In emergency power failure, high pressure water will remain in the high pressure system, once have the power, the residual high pressure water will spray, therefore, at this time do not close to the cutting head, after re-connecting the power supply, need to remove the residual high pressure water.

• The cleanness of garnet sand affects cutting efficiency
• Globally, the number of confirmed cases exceeded 380,000 and 230 million