Bearing steel grit is made of chrome alloy material which are fast atomized after melting.After heat treatment,it is featured
with optimum mechanical characteristics, good tenacity,high fatigue resistance,long working-life,low consumption and so on. 30% will be
saved. Mainly used in granite cutting,sandblasting and shot peening.
Bearing steel grit is made of chrome alloy material which are fast atomized after melting.
After heat treatment,it is featured
with optimum mechanical characteristics, good tenacity,
high fatigue resistance,long working-life,low consumption and so on. 30% will be
saved. Mainly used in granite cutting,sandblasting 。
Products | Steel Grit | |
Chemical Composition% | ||
C | 0.8-1.20% | |
Si | 0.4-1.2% | |
Mn | 0.6-1.2% | |
S | ≤0.05% | |
P | ≤0.05% | |
Hardness | steel shot | GP 41-50HRC;GL 50-55HRC;GH 63-68HRC |
Density | steel shot | 7.6g/cm3 |
Micro structure | Martensite structure | |
Appearance | Spherical Hollow particles<5% Crack particle<3% | |
Type | G120,G80,G50,G40,G25,G18,G16,G14,G12,G10 | |
Diameter | 0.2mm,0.3mm,0.5mm,0.7mm,1.0mm,1.2mm,1.4mm,1.6mm,2.0mm,2.5mm | |
Application |
1.Granite cutting 2.Blast cleaning: Used for blast cleaning of casting, die-casting,forging; sand removal of casting, steel plate, H type steel, steel structure. 3..Rust removal: Rust removal of casting, forging, steel plate, H type steel,steel structure. 4.Shot peening: Shot peening of gear, heat treated parts. 5.Shot blasting: Shot blasting of profile steel, ship board, steel board, steel material,steel structure. |
SIZE DISTRIBUTION OF STEEL GRIT | ||||||||||||
Screen No. | In | Screen size | SAE J444 Standard Steel grit | |||||||||
G10 | G12 | G14 | G16 | G18 | G25 | G40 | G50 | G80 | G120 | |||
6 | 0.132 | 3.35 | ||||||||||
7 | 0.111 | 2.8 | All Pass | |||||||||
8 | 0.0937 | 2.36 | All Pass | |||||||||
10 | 0.0787 | 2 | 80% | All Pass | ||||||||
12 | 0.0661 | 1.7 | 90% | 80% | All Pass | |||||||
14 | 0.0555 | 1.4 | 90% | 80% | All Pass | |||||||
16 | 0.0469 | 1.18 | 90% | 75% | All Pass | |||||||
18 | 0.0394 | 1 | 85% | 75% | All Pass | |||||||
20 | 0.0331 | 0.85 | ||||||||||
25 | 0.028 | 0.71 | 85% | 70% | All Pass | |||||||
30 | 0.023 | 0.6 | ||||||||||
35 | 0.0197 | 0.5 | ||||||||||
40 | 0.0165 | 0.425 | 80% | 70%min | All Pass | |||||||
45 | 0.0138 | 0.355 | ||||||||||
50 | 0.0117 | 0.3 | 80%min | 65%min | All Pass | |||||||
80 | 0.007 | 0.18 | 75%min | 65%min | ||||||||
120 | 0.0049 | 0.125 | 75%min | 65%min | ||||||||
200 | 0.0029 | 0.075 | 70%min | |||||||||
GB | 2.5 | 2 | 1.7 | 1.4 | 1.2 | 1 | 0.7 | 0.4 | 0.3 | 0.2 |
2005-2019 © All Rights Reserved.JINAN JUNDA INDUSTRIAL TECHNOLOFY CO.,LTD