It is produced by German atomization technology and mainly used for sandblasting on the surface of aluminum profiles. The product has the advantages of bright and round particles, less dust, low loss rate and wide spray coverage. Greatly reduce the production cost of aluminum profile enterprises

Application:

It is mainly used for deburring and surface finishing of aluminum die casting, zinc alloy die casting and magnesium alloy die casting; surface finishing of precision casting, stainless steel casting and landscape block; glass making, surface cleaning and various pretreatment of die casting mould.

Specialty:

Compared with stainless steel shot, Tonghua atomization method has no prominent edges and corners, and does not need to worry about the sudden increase of surface roughness when adding shot materials. The product has complete styles.

Scope of application:

1. Surface finishing of aluminum zinc die casting and surface cleaning of aluminum sand casting. The surface of artificial marble is sprayed and polished. Cleaning and finishing of high alloy steel casting surface oxide scale, aluminum alloy engine block and other large die casting parts, marble surface effect treatment and antiskid treatment

2. Aluminum zinc die casting, surface cleaning of precision casting, surface roughening before special coating, refined spray polishing of aluminum profile to remove surface extrusion lines, refined spray polishing of copper aluminum pipe surface, and refined spray polishing of stainless steel container and valve.

3. Clean up the cold casting tools, chromium plating dies for forging dies and tires, renovate the pump cover of automobile engine supercharger, strengthen the precision gear and spring of starter, and spray polishing the surface of stainless steel container.

4. Aluminum zinc die casting, motorcycle engine box, cylinder head, carburetor, engine fuel pump shell, intake pipe, car lock. The surface of low pressure die casting wheel profile shall be cleaned and finished before painting. Surface finishing and cleaning of copper aluminum stainless steel stamping parts, investment casting stainless steel parts, etc.


Project 304 Quality 430 Quality
Chemical composition% C 0.08-1.0 <0.2
Si 0.4-1.2 <1.5
Mn 0.35-1.2 0.8-1.2
S <0.05 <0.05
P <0.05 <0.05
Cr 15-16.5 15-17 ,
Ni 5-8% 0
Hardness HRC40-50 HRC35-50
Density 7.00 g/cm3
Microstructure austenitic Ferrite
Appearance Spherical
Hollow particles=0%
Hollow particles=0%
Type 14-18# / 16-20# / 20-25# / 25-30# / 30-40# / 40-70# / 70-140# / 140-270#
Packing Each ton in a separate Pallet and each ton divided in 25KG packs .
Durability 27000~28000 times
Density 7.0g/cm3

Application

It is mainly used for deburring and surface finishing of aluminum die casting, zinc alloy die casting and magnesium alloy die casting; surface finishing of precision casting, stainless steel casting and landscape block; glass making, surface cleaning and various pretreatment of die casting mould.


Application

TYPE Recommended scope of use
14-18# Clean up the cold casting tools, chromium plating dies for forging tires, renovate the pump cover of automobile engine supercharger, strengthen the precision gear and spring of starter, and spray polishing the surface of stainless steel container.
16-20# Aluminum zinc die casting, surface cleaning of precision casting, surface roughening before special coating, refined spray polishing of aluminum profile to remove surface extrusion lines, refined spray polishing of copper aluminum pipe surface, and refined spray polishing of stainless steel container and valve.
20-25# Aluminum zinc die casting, motorcycle engine box, cylinder head, carburetor, engine fuel pump shell, intake pipe, car lock. The surface of low pressure die casting wheel profile shall be cleaned and finished before painting. Surface finishing and cleaning of copper aluminum stainless steel stamping parts, investment casting stainless steel parts, etc.
25-30# Aluminum zinc die casting surface finishing, aluminum sand casting surface cleaning. The surface of artificial marble is sprayed and polished.
30-40# In addition to wg40 function, the surface of stainless steel casting is smooth and fine. Descaling treatment of alloy steel forgings. Artificial marble surface finishing effect and antiskid treatment.
40-70# High alloy steel casting surface oxide skin, aluminum alloy engine block and other large die casting parts cleaning and finishing, marble surface effect treatment and anti-skid treatment.
70-140#
140-270#
The surface of the formed steel casting is deaerated before coating, automobile wheel hub, engine shell treatment, granite products and marble steps roughening and anti-skid treatment.

Granularity

ScreenNO. Screensize mm In 14-18 16-20 20-25 25-30 30-40 40-70 70-140 140-270
14 1.4 0.0555                
16 1.18 0.0469                
18 1 0.0394                
20 0.85 0.0331                
25 0.71 0.0278                
30 0.6 0.0234                
35 0.5 0.0197                
40 0.425 0.0165                
50 0.3 0.0117                
70 0.212 0.0083                
100 0.15 0.0059                
140 0.106 0.0041                
270 <0.05 <0.0019                

11
22
33
44

Alloy casting cleaningAlloy casting cleaning
Alloy casting cleaning-2Alloy casting cleaning-2
Polishing of alloy castingPolishing of alloy casting
Polishing of alloy casting-2Polishing of alloy casting-2
Surface treatment of alloy castingSurface treatment of alloy casting


Please fill in the following form to contact us